Kits for water analysis

Print

 

The analysis of water represents the first step towards the successful design of a water treatment plant. Consequently, OSMO SISTEMI S.r.l. has also a wide range of kits, which can be used to determine the water characteristics.

 

SDI kit for SDI test (Silt Density Index)

 

Colloidal fouling of reverse osmosis elements can seriously impair the performance by lowering productivity and sometimes salt rejection. The major source of silt or colloids in reverse osmosis feed waters  varies and often includes bacteria, clay, colloidal silica, and iron corrosion products. The best available technology for determining the colloidal fouling potential of reverse osmosis feed water is the measurement of the Silt Density Index (SDI), sometimes referred to as the Fouling Index (FI). This is an important measurement to be carried out prior to designing an RO pre-treatment system and on a regular basis during RO operations.
 

SDI KIT 

Main characteristics

Very well designed kit used to measure the Silt Density Index (SDI) of the water.

The kit comes into a plastic case complete of the following accessorizes:

 - 0,45 µm size millipore filter pads,

 - 1-5 bar pressure gauge,

 - 47 mm diameter filter holder,

 - Valve for pressure adjustment.

Approximate dimension: 15x36x26 cm

Approximate weight:       3,6 kg


The SDI kit is ready Ex-Stock

 

  

pH meter

The measurement of pH in the raw water is another important factor to know in order to design properly a Reverse Osmosis unit.

 

 

ph meter 2017

Main characteristics

Kit used to measure the pH of the water.

The kit comes into a plastic case complete of the following accessorizes:

 - pH meter electronic instrument

 - pH probe,

 - temperature probe,

Approximate dimension: 15x36x26 cm

Approximate weight:       1,00 kg


The pH meter is ready Ex-Stock Unless sold

 

 

 

Conductivity meter

 

conductivity

Main characteristics

Kit used to measure the conductivity of the water.

The kit comes into a plastic case complete of the following accessorizes:

 - conductivity meter electronic instrument

 - conductivity  probe,

Approximate dimension: 15x36x26 cm

Approximate weight:       1,00 kg


The conductivity meter is ready Ex-Stock Unless sold

 

 

 

 

 

 

 

 

 

Tuesday the 17th. © 2013 OSMOSISTEMI. Joomla 3.0 templates. All rights reserved.